1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading ... Loading ...

Error reset Canon Pixma IP2770

Error reset Canon Pixma IP2770

CANON PIXMA iP27 4c413c670c232 Error reset Canon Pixma IP2770
Canon PIXMA iP2770 are classified into photo printers. This printer is very suitable for use at home. Results in getting the equivalent of lab quality photos. The speed  of this printer quickly spelled out that is about 7 ipm for mono and the 4.8 ipm for color and for 4R-sized photo takes 55 seconds. Resolution of Canon PIXMA iP2770 printer at 4800 x 1200dpi (max). Still uses USB 2.0 connectivity and the type cartridge using PG-810, CL-811 (PG-810XL, CL811XL Optional). For this printer weight of 3.4 kg with dimensions of 445 X 250 X 130mm.
If a lights blink on the POWER and RESUME button alternately and it will show an error 5B00. It means that your ink absorber inside the printer is almost full. In order to solve this you need to clear or reset the counter protection of your printer. To do this, follow this steps.
First make sure that the power cable and usb cable are connected, before you perform the reset procedure. And download the resetter at the bottom of this post.

FIRST STEPS:  Entering Service Mode

You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.

2. Hold down Resume button and press Power button.

3. Keep holding down Power button and let Resume button go.

4. Then Press Resume button 5 times then let BOTH buttons go.

5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

click tweet or google plus or like to download the resetter softwere

1. After you download the resetter, extract it and double click “teamtech.exe”

2. Press the “Main” Button, Then press “EEPROM Clear” button if a pop-up appear just click OK

5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!

Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean the ink wastepad.

This is a new Service Tool

Please leave a comment, if its working

Error reset Canon Pixma IP2770

45,811 total views, 4 views today

Recent search:

  • how to reset canon ip2770
  • resetter canon ip2770
  • reset canon ip2770
  • service tool canon ip2770
  • canon ip2770 resetter
  • canon pixma ip2770 resetter
  • ip2770 resetter 2013
  • canon ip2770 blinking error
  • canon ip2770 no power after reset
  • canon ip2770 reset

Comments

  1. Ellen Gold Pinili says

    Hi. Good afternoon. I have successfully reset one of my canon pixma ip2270 printers before. Now, I have another ip2770 that needs to be reset. I did the same procedure as above-instructed yet I cannot access the service mode. The orange light goes steady instead of green. How can I possibly solve this problem? Hope you could help me on this… Thank you so much!

    • pramod says

      Warning: Getting rid of the error message won’t change that you might end up with ink leaking out of the printer if you don’t either replace or clean the ink wastepad.

  2. Wilson Bornales says

    hi good afternoon i downloaded your software and fallow the procedure when i double click the software i download it hangs the sofware and it says not responding please help me with my problem

  3. paul raymond says

    Hi. Good afternoon. I have successfully reset one of my canon pixma ip2270 printers before. Now, I have another ip2770 that needs to be reset. I did the same procedure as above-instructed yet I cannot access the service mode. The orange light goes steady instead of green. How can I possibly solve this problem? Hope you could help me on this… Thank you so much!

     

     

     

    same problem sir do you have a screen shots 0n how to d0 this kind of error..tnx

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>